Hydro-Thermal-Mechanical Modelling In Tight Formations (Dedicated Session)
Tracks
Dedicated Session
| Wednesday, June 13, 2018 |
| 1:30 PM - 5:10 PM |
| Room K |
Speaker
Dr Ingrid Tomac
Assistant Professor
University of California, San Diego
Micro-Mechanics of Hydro-Thermo-Mechanical Hydraulic Fracture Initiation and Propagation
1:30 PM - 1:55 PM
Ms Paromita Deb
Geoscientist
Institute for Applied Geophysics and Geothermal Energy
Laboratory Fracking Experiments for Verifying Numerical Simulation Codes
1:55 PM - 2:20 PM
Mr Arash Dahi Taleghani
The Pennsylvania State University
Coupled Modeling of Complex Fracture Networks Induced during Hydraulic Fracturing Treatments
2:20 PM - 2:45 PM
Dr Stephen Laubach
University of Texas at Austin
Chemical-Mechanical Feedback and Fracture Size and Spacing Patterns
2:45 PM - 3:10 PM
Dr Pierre Samier
Reservoir Engineer
Total SA
Coupling an Industrial Reservoir Simulator and a Geomechanical Software Using Unstructured Grids, Poromechanical Element
3:30 PM - 3:55 PM
Dr Saeed Salimzadeh
Danish Hydrocarbon Research and Technology Centre
Radial Jet Drilling (RJD) Laterals in Fractured Geothermal Reservoirs
3:55 PM - 4:20 PM
Dr Jinghan Zhong
University of Toronto
Analysis of the Fracturing Sequence Effect on the Multi-Fracture Propagation in the Horizontal Well of the Tight Sandsto
4:20 PM - 4:45 PMSession co-chair 1
Saeed Salimzadeh
Danish Hydrocarbon Research and Technology Centre
Session co-chair 2
Hamid Nick
Senior Research Scientist
Technical University of Denmark
